WAGO 736-102 Double-Deck PCB Terminal Strip

WAGO 736-102 Double-Deck PCB Terminal Strip

$2.47

WAGO 736-102 Wire-To-Board Terminal Block, 2, 320 V, 21 A, 28 AWG, 12 AWG, 2.5 mm

Out of stock

SKU: 736-102 Category: Tag:

Description

WAGO 736-102 Wire-To-Board Terminal Block, 2, 320 V, 21 A, 28 AWG, 12 AWG, 2.5 mm
^ Block Orientation: Through Hole 45
^Conductor Area CSA: 2.5mm
^Connector Type: Terminal Block, PCB
^Contact Material: Steel
^No. of Positions: 2
^Pitch Spacing: 5mm
^Rated Current: 21A
^Rated Voltage: 320V
^SVHC: No SVHC (17-Dec-2014)
^Series: 736
^Wire Connection Method: Clamp
^Wire Size AWG Max: 12AWG
^Wire Size AWG Min: 28AWG

Terminal strips with screwdriver-actuated CAGE CLAMP®
High-density, double-deck design for space-efficient wiring of multiple conductors in confined areas
Custom inkjet marking for all termination levels
Terminal strips with commoning strips for distribution of potential

NameValueUnit
No. of poles 2  
Pin Spacing 5 mm / 0.197 in %  
Total number of connection points 4  
Total number of potentials 4  
Number of levels 2  
Color gray  
Ratings according to 1 IEC/EN 60664-1  
Overvoltage category EN 1 III  
Pollution degree (1) 2  
Rated voltage EN (1) [V] 320 V 
Rated surge voltage (1) [kV] 4 kV 
Nominal current [A] 21 A 
Overvoltage category EN 2 II  
Degree of pollution (2) 2  
Rated voltage EN (2) [V] 630 V 
Rated surge voltage (2) [kV] 4 kV 
Nominal current (2) [A] 21 A 
Overvoltage category EN 3 III  
Degree of pollution (3) 3  
Rated voltage EN (3) [V] 250 V 
Rated surge voltage (3) [kV] 4 kV 
Nominal current (3) [A] 21 A 
Number of individual connection objects at the product 1  
Connection technology (1) CAGE CLAMP®  
Solid sizes 1 0.08 … 2.5 mm² / 28 … 12 AWG  
Fine-stranded wires 1 0.08 … 2.5 mm² / 28 … 12 AWG  
Fine-stranded wires with insulated ferrule 1 0.25 … 1.5 mm² / …  
Fine-stranded wires with uninsulated ferrule 1 0.25 … 2.5 mm² / …  
Strip length 1 5 … 6 mm / 0.2 … 0.24 in  
Conductor entry angle to the PCB 1 [°] 45 ° 
Solder pin length [mm] 4 mm 
Solder pin width A [mm] 0.7 mm 
Solder pin width B [mm] 0.7 mm 
Tolerance of drilled hole [mm] 1.3(+ 0.1) mm 
Material group I  
Insulating material Polyamide 66 (PA 66)  
Flammability rating per UL 94 V0  
Limit temperature range -60 C … 105 C  
Clamping spring material Chrome-nickel spring steel (CrNi)  
Contact material Electrolytic copper (Ecu)  
Contact plating tin-plated  
Fire load [MJ] 0.081 MJ 
Weight [g] 4.94 g 
Width 11 mm / 0.433 in  
Height 30.5 mm / 1.201 in  
Height from the surface 26.5 mm / 1.043 in  
Length 21 mm / 0.827 in  

Manufacturer Part Number: 736-102

Manufacturer: Wago

Datasheet: Wago/736-102.pdf

Additional information

manufacturer

Related products